SamplePro FlexFilm Air Sample Bags

          

Cost effective alternative to Tedlar for performance and economy Lower total VOC background than Tedlar Choose your fitting Single combined polypropylene hose/valve and septum for economy and light weight Dual stainless steel for sampling flexibility Superior storage stability for organic vapors Minimal adsorption Stocked in a variety of sizes; Custom bags available

Available with these fittings:
Single Polypropylene	Dual Stainless Steel

SKC SamplePro® FlexFilm bags are constructed of 3-mil SKC proprietary material ideally suited for collecting air samples of VOCs. Manufactured exclusively for SKC, FlexFilm features lower total VOC background than Tedlar and shows the same sample stability for VOCs as seen with Tedlar. When combined with SKC quality fittings, the result is an economical sample bag with lower background levels and superior storage stability for collected compounds.

Single Polypropylene Fitted SamplePro FlexFilm Bags

Fitting	Internal Size - inches † (cm)	Maximum Capacity (liters)	Qty.	Cat. No.
Single Polypropylene	5.25 x 7.5 (13.3 x 19)	0.5	pk/10	236-006
			ea	236-006A
	8.25 x 7.25 (21 x 18.4)	1	pk/10	236-001
			ea	236-001A
	8.25 x 15.25 (21 x 38.7)	3	pk/10	236-002
			ea	236-002A
	10.25 x 17.5 (26 x 44.4)	5	pk/10	236-005
			ea	236-005A
	12 x 18 (30.5 x 45.7) (for large Vac-U-Chamber 231-939)	8	pk/10	236-004
	18.25 x 14.25 (46.4 x 36.2)	10	pk/10	236-003
			ea	236-003A
		25	pk/5	236-007
		40	pk/5	236-040
		80	pk5	236-080
Replacement Septa			pk/10	232-01-RS
Single Polypropylene Fitted Bag Operating Instructions (PDF) Handling Guidelines for Working with SamplePro FlexFilm Bags with Polypropylene Fitting (PDF)

†	1/8-inch tolerance

Dual Stainless Steel Fitted SamplePro FlexFilm Bags

Fitting	Internal Size - inches † (cm)	Maximum Capacity (liters)	Qty.	Cat. No.
Dual Stainless Steel	5.25 x 7.5 (13.3 x 19)	0.5	pk/10	237-02
			ea	237-02A
	8.25 x 7.25 (21 x 18.4)	1	pk/10	237-01
			ea	237-01A
	8.25 x 15.25 (21 x 38.7)	3	pk/10	237-03
			ea	237-03A
	10.25 x 17.5 (26 x 44.4)	5	pk/10	237-05
			ea	237-05A
	18.25 x 14.25 (46.4 x 36.2)	10	pk/10	237-08
			ea	237-08A
		25	pk/5	237-025
		40	pk/5	237-040
		80	pk5	237-080
Replacement Septa			pk/10	231-9-04
Dual Stainless Steel Fitted Bag Operating Instructions (PDF) Handling Guidelines for Working with SamplePro FlexFilm Bags (PDF)

†	1/8-inch tolerance

SamplePro FlexFilm Evaluation Poster (PDF)

MSDS — SamplePro FlexFilm (PDF)

Sample Bag Brochure (PDF)

SKC Custom Sample Bag Order Form (PDF)

Handling Guidelines for Working with SamplePro FlexFilm Bags with Polypropylene Fitting (PDF)

Handling Guidelines for Working with SamplePro FlexFilm Bags (PDF)

SKC FlexFilm Sample Bags Use Guidelines video page

Bag Stability Report (PDF)

Operating Instructions

Single Polypropylene Fitted Bag Operating Instructions (PDF)

Bag Accessories

	SKC Low Flow Pump 222 Series SKC 222 Series low flow personal sample pumps with NiCad battery. Flow range: 50 to 200 ml/min
	SKC Grab Air Bag Sampling Pump Designed to fill sample bags at 1 L/min. Collects approximately 1000 liters volume on one battery. Recommended for use with sample bags up to 10-liter size.
	The SKC Vac-U-Chamber ™ The SKC Vac-U-Chamber is a rigid air sample box allowing the direct filling of an air sample bag using negative pressure provided by most personal air sampling pumps.
	The SKC Vac-U-Tube ™ An easy way to take quick bag samples, the SKC Vac-U-Tube is an acrylic syringe with a removable face plate that allows a specially designed 0.7-liter SamplePro PVDF (Cat. No. 247-945A) or FlexFilm (Cat. No. 236-945A) bag to be placed inside.
	PTFE Tubing Use only PTFE tubing for bag sampling to prevent loss through adsorption to the tubing surface.