SKC Guide to HSE Air Sampling Methods

Aluminium oxides (inhalable dust)

Chemical hazard:	Aluminium oxides (inhalable dust)
MDHS Reference:	14/3
Agency Standards
TWA:	10 mg/m3
Volume (liter)
TWA:	960
Rate (ml/min):
TWA:	2000
Time:
TWA (hours):	8
Analytical Method:	GR -- Gravimetric Analysis
SKC Equimpent:	IOM Particulate Sampler 225-70A  Filter 225-58F

---

Chemical Hazard Search:
	Enter chemical name in box above

---

Method Number Search:
	Enter method number in box above

---

Catalog Number Search:
	Enter the exact SKC Catalog number in box above

---

Chemical Hazards by First Letter

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

This SKC Air Sampling Guide is a reference only to assist users in finding the method, sampling equipment, and sampling media for a specific compound. This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. Users must consult the appropriate sampling method for the compound of interest before sampling. The sampling parameters shown here are suggestions based on the ranges or volume, flow, and time specified in the methods. It is the responsibility or the analyst performing the sampling and analysis steps to adjust the parameters so that the required detection limits can be obtained. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures.