|
|
SKC Deployable Sampler Systems
Ambient Air Kits for 24-hour Sampling
- Compact and portable — only one case!
- Fast setup with modular components and quick-connect tubing
- Ideal for remote locations and indoor air sampling
- 24-hour Li-Ion battery-operated system
- Easy, secure operation from within a heavy-duty lockable case
- Quick-mount bracket is easy to install
- Quick-change battery packs
- Rain cover protects sampling head
- Compact for easy transport
- Low noise for indoors
- System pump provides constant, accurate airflows
- Simple 3-button keypad for setting a single unattended sample run
- Program for multiple runs with a PC and DataTrac for Leland Legacy Software
- Available for sampling PM10, PM2.5, or PAHs/PHDDs/PHDFs
Originally designed for the U.S. Military, SKC now offers portable,
lightweight, and cost-effective ambient air sampling systems. Two complete
sampling systems are available: one is designated for particulates
PM10 or PM2.5, the other is for polycyclic aromatic hydrocarbons (PAHs)/polyhalogenated
dibenzo-p-dioxins
(PHDDs)/polyhalogenated
dibenzofurans (PHDFs). Both kits feature the fully programmable Leland
Legacy Sample Pump with high-power Li-Ion battery for over 24 hours
of run time. Specially designed sampling heads are easily loaded with
media and deployed. Accessories such as a quick-mount bracket and quick-connect
tubing provide for convenient setup. Unlike other ambient sampling
systems, SKC deployable systems fit into one heavy-duty, compact Pelican
case that is easily carried or shipped and takes only a few minutes
to deploy. The pump operates from inside the case for protection during
sampling. SKC deployable sampler systems offer the added advantage
of PC programmability with the DataTrac Software accessory for advanced
scheduling options and record keeping.
Deployable Systems Performance Profile
| Flow Rate |
10 L/min |
| Run Time |
> 24 hrs (one battery charge) |
| Power |
Rechargeable Li-Ion battery, 7.4 V, 12-Ah capacity, 88.8
Wh |
| Case Dimensions |
18.5 x 14.1 x 6.9 in (47 x 36 x 18 cm) |
| System Weight |
DPS: 13 lbs (5.9 kg)
DCS: 12.2 lbs (5.5 kg) |
Deployable Particulate Sampler (DPS) System
Ambient PM10 or
PM2.5 Sampling
|
|
DPS System |
Patented IMPACT sampling head for DPS
For more information, see the
Impact Sampler page.
U.S. Patent No. 7,334,453 |
DPS Ordering Information
| Description |
Qty. |
Cat.
No.
|
DPS System includes
sample pump with connection case, charger (100-240 V), 2 external
battery assemblies, IMPACT* sampling head, 2 filter cassettes,
calibration adapter, rain
cover for sampling head, 25 disposable impaction disks (limited
shelf-life), filter cassette opener, tubing
with
quick-connect fitting, and mounting bracket in a heavy-duty lockable
carry case. Two external battery assemblies with adapters are
packaged separately.
DPS Systems contain Leland Legacy pumps with Li-Ion batteries
and may be subject to special shipping regulations dependent
upon
quantity.
Use in non-explosive environments only.
Not UL Listed for intrinsic safety
Provides data similar to data
from Federal Reference Method samplers. The DPS System is not a
Federal Reference Method sampler.
* U.S.
Patent No. 7,334,453
|
PM10 Kit |
ea |
|
PM2.5 Kit |
ea |
|
Collection
Filters for DPS System (not supplied with system)
Select a collection filter based on your application; required
for sampling |
|
|
| Quartz Filters, 47
mm, Tissuquartz, 432 µm thick |
25 |
|
PTFE Filters, 47
mm, 2.0-µm pore size, with PMP support ring
Back pressure on PTFE filters can vary within the same
lot.
The maximum operating temperature is 464 F (240 C) based on PMP support
ring. |
50 |
|
| Accessories |
|
|
| Replacement Impaction
Disks, 37 mm, pre-oiled, ready to use, disposable, required
for sampling, limited shelf-life |
25
|
|
50
|
|
| Replacement Filter Cassette |
ea |
|
| Petri Dish Slide, for filter transport |
100 |
|
DataTrac Software for Leland Legacy includes
software on CD, DataTrac adapter, and DataTrac cable
Requires Windows 98 or higher and available serial port
or appropriate adapter compatible with PC and system |
ea |
|
DPS
Spec. Sheet (PDF)
DPS
Operating Instructions (PDF)
DPS Quick
Guide (PDF)
Deployable
Particulate Sampler (DPS) Poster Presentation at NAVY’s 45th Annual
Occupational Health and Preventative Medicine Conference (PDF)
Modular
Impactors Poster Presentation (PDF)
Deployable Cartridge Sampler (DCS) System
Ambient Sampling of PAHs/PHDDs/PHDFs/Associated
Particulate
|
|
DCS System |
Sampling head holds media cartridge for
DCS |
DCS Ordering Information
| Description |
Cat. No. |
DCS System includes sample pump
with connection case, charger (100-240 V),
2 external
battery assemblies, sampling
head, calibration adapter, rain cover for sampling head, sample
tubing with quick-connect fitting, calibration tubing, and mounting
bracket
in a heavy-duty
lockable carry case. Two external battery assemblies with adapters
are packaged separately.
Cartridges, filters, and media
available separately |
|
| Media, required,
select based on application |
Cat. No. |
| Cartridge for TO-9A includes
PUF/quartz filter in a glass cartridge |
|
| Cartridge for TO-13A includes
XAD®-2
sorbent/quartz filter in a glass cartridge |
|
| Accessories
|
DataTrac Software for Leland Legacy includes
software on CD, DataTrac adapter, and DataTrac cable
Requires Windows 98 or higher and available serial port
or appropriate adapter compatible with PC and system |
|
DCS
Spec. Sheet (PDF)
DCS
Operating Instructions (PDF)
DCS Quick
Guide (PDF)
This page was last modified July 16, 2010
|
