 |
|||||||||||
 |
 |
 |
 |
 |
 |
||||||
| |
|||||||||||
HAZ-SCANNER IEMS
Indoor Environmental Monitoring Station
- Direct reading
- Measures and displays data for up to 14 critical air quality parameters
- Standard configuration measures 5 parameters including PM10 or TSP particulates, CO2, CO, temperature, and relative humidity
- Add one or all optional plug and play sensors (up to 4) and/or IEMS-specific
meters (up to 5) as listed below.
Choose from additional toxic gas sensors, PID for VOCs, and IEMS-specific light intensity, sound/noise, atomic/nuclear radiation, ELF radiation, and air velocity meters
- Available analog input port for alternative meter
- Interchangeable size-selective impactors are available for
PM1.0, PM2.5, or PM4.0 (close approximation of respirable)
- In-line standard 37-mm or optional 25-mm gravimetric filter cassette provides concurrent filter sampling for chemical and biological analysis
- Internal sample pump provides 1 to 4 L/min flows
- NiMH battery for 8-hour operation, continuous operation with AC power
- Displays TWA, STEL, Max, and Min
- Optional alarm indicator light and siren for user-defined threshold limits
- Removable handheld meters for spot-checking remote areas
- Datalogging and optional real-time wireless data transmission
- Easy-to-use graph and reporting software — compatible with PC and Mac
The portable HAZ-SCANNER™ IEMS indoor environmental monitoring station is designed to measure critical parameters for indoor environmental assessments, Green Building certifications, school zone measurements, job task analysis, and occupational health and safety compliance. The IEMS displays real-time readings with datalogging capabilities. Configure IEMS for up to 14 simultaneous critical indoor measurements in one portable instrument. The IEMS can also be configured for wireless data acquisition to allow for continuous unattended sampling up to one mile. Easily download data to a PC or Mac and create compliance-ready graphical reports with the supplied software.
HAZ-SCANNER IEMS Applications
|
 |
Performance Profile
Optimized for indoor environmental quality applications. Custom calibration for specific ranges and ambient applications upon request.
| Particulates IEMS Sensor | Measurement/Concentration Range |
| 90° Infrared Light Scattering | 1 to 20,000 µg/m3 or 0.01 to 200 mg/m3 |
| Particle Size Range | 0.1 to 100 µm |
| Particle Size Measurement | 1 µm, 2.5 µm, or 4.0 µm (optional)
10 µm or TSP (standard) |
| Volatile Organic Compounds (VOCs) IEMS Sensor | Measurement/Concentration Range |
| PID (10.6 eV) | 0 to 2000 ppm (optional) |
| Carbon Dioxide IEMS Sensor | Measurement/Concentration Range |
| NDIR | 0 to 10,000 ppm (standard) |
| Toxic Gases (Electrochemical) IEMS Sensor | Measurement/Concentration Range |
| CO-Carbon Monoxide | 0 to 1000 ppm (standard) |
| NO-Nitric Oxide | 0 to 100 ppm (optional) |
| NO2-Nitrogen Dioxide | 0 to 50 ppm (optional) |
| O2-Oxygen | 0 to 30% Vol. (optional) |
| O3-Ozone | 0 to 0.5 ppm (optional) |
| O3-Ozone | 0 to 10 ppm (optional) |
| SO2-Sulfur Dioxide | 0 to 50 ppm (optional) |
| H-Hydrocarbon | 0 to 1000 ppm (optional) |
| Other Parameters (IEMS-specific meters) | Measurement/Concentration Range |
| Temperature | 0 to 140 F (-18 to 60 C) (standard) |
| Relative Humidity (RH) | 0 to 100% (standard) |
| Light Intensity | 0 to 50,000 Lux/0 to 5000 fc (optional) |
| Sound | 30 to 135 dB (optional) |
| Atomic/Nuclear Radiation | 1 to 19,999 counts per minute (cpm) (optional) |
| ELF Radiation | 1 to 200 milligauss (mG) (optional) |
| Air Velocity | 0 to 30 m/s or 0 to 5910 ft/min (optional) |
| Wet Bulb Temperature | 3.2 to 122 F (-16 to 50 C) (one meter-optional) |
| HAZ-SCANNER IEMS Instrument Specifications | Measurement/Concentration Range |
| Display | LCD |
| Operation | 4-key splash-proof membrane switch |
| Power | 12-V NiMH rechargeable battery |
| Operating Time | 8 hrs on battery, continuous on AC |
| Display Measurements | TWA, STEL, Max, Min |
| Recording Time | 1 sec to 21 weeks |
| Sampling Rate | 1 sec, 1 min, 10-min intervals |
| Data Storage | 36,000 data points |
| Sampling Pump | 1 to 4 L/min |
| Digital Output | RS-232 (PC), RS-423 (Mac) |
| Software | PC or Mac compatible |
| Dimensions | 7 x 4 x 11 in (17.8 x 10.2 x 28 cm) |
| Weight | 6 lbs (2.7 kg) |
| Operating Temperature | 32 to 122 F (0 to 50 C) |
| Storage Temperature | -4 to 140 F (-20 to 60 C) |
| Humidity | 95% non-condensing |
| Wireless Radio Modem | 900 MHz (U.S.) 868 MHz (Euro) |
| Auxiliary Analog Input | 0 to 2.5 VDC (1 channel for alternative meter) |
| Description | Cat. No. |
|
| HAZ-SCANNER IEMS includes monitor with PM10 or TSP particulate,
CO2, CO, temperature, and relative humidity sensors, charger, HazComm Pro Software,
cables, CD-ROM with instructions, and carry case Requires calibration using appropriate calibration gas(es) and regulator sold separately HAZ-SCANNER IEMS is expandable to up to 14 parameters; see sensors and meters listed below. |
||
| IEMS-specific Optional Meters
(Choose up to 5 ), each includes holder to mount meter on tripod
accessory |
||
| Air Velocity Meter, 0 to 30 m/s or 0 to 5910 ft/min | ||
| Atomic/Nuclear Radiation Meter, 1 to 19,999 cpm | ||
| ELF Radiation Meter, 1 to 200 mG | ||
| Indoor Light Intensity Meter, 0 to 50,000 lux/0 to 5000 footcandles | ||
| IEMS-specific Optional Sensors
(Choose up to 4 )† |
||
| Nitrogen Dioxide Sensor, 0 to 50 ppm* | ||
| Sulfur Dioxide Sensor, 0 to 50 ppm* | ||
| Oxygen Sensor, 0 to 30%* | ||
| Ozone Sensor, 0 to 0.5 ppm* | ||
| Ozone Sensor, 0 to 10 ppm* | ||
| PID for VOCs, 0 to 2000 ppm (isobutylene equivalent) | ||
| Accessories | ||
| Size-selective Impactors | PM1.0 | |
| PM2.5 | ||
| PM4.0 | ||
| Calibration Standard, particulate | ||
| Calibration Regulator, 1.0 L/min fixed flow, male thread, for use with 34/58 L aluminum cylinder, required for use with calibrator gas for toxic gases | ||
| Tripod Stand for HAZ-SCANNER IEMS includes holder for IEMS | ||
| Alarm for HAZ-SCANNER IEMS | ||
| Wireless Radio Modem, 900 MHz, up to 300 feet | ||
| Wireless Radio Modem, 900 MHz, up to 1500 feet | ||
| † | Hydrocarbon sensors and specialty sensors for nitric oxide, chlorine, hydrogen cyanide, and hydrogen sulfide are available. Contact SKC; specify gas type when ordering. |
| * | Additional calibration gas for the specific chemical is required when using additional toxic gas sensors. |
HAZ-SCANNER IEMS Product Data Bulletin
(PDF)
| About SKC | Terms of Use | Privacy Policy | Contact Us | Site Map | Ordering Information |
SKC Inc.'s Quality Policy is in Compliance with IS0 9001-2000
© Copyright 1995-2012 SKC Inc