 |
|||||||||||
 |
 |
 |
 |
 |
 |
||||||
| |
|||||||||||
Sorbent Tube Accessories
These tube holders allow higher flow pumps to sample in the 5 to 500 ml/min flow range and provide for multiple tube sampling. Flow rate can be adjusted using the convenient flow adjust screw on the holder.
| Adjustable Low Flow Tube Holder Type | Cat. No. | |
| Single Adjustable Low Flow Holders, 5
to 500 ml/min Require plastic protective covers below |
 |
224-26-01 |
| Dual Adjustable Low Flow Holders, 5
to 500 ml/min Require plastic protective covers below |
 |
224-26-02 |
| Tri Adjustable Low Flow Holders, 5
to 500 ml/min Require plastic protective covers below |
 |
|
| Quad Adjustable Low Flow Holders, 5
to 500 ml/min Require plastic protective covers below |
 |
224-26-04 |
Adjustable Low Flow Tube Holders Operating Instructions (PDF)
Plastic Protective Covers
Sorbent sample tubes size determines protective cover size. Collar clips are attached to the plastic tube cover for your convenience. Sample tubes sizes and recommended covers can be found on the sorbent tube pages. Protective covers require low flow holders above. Tube covers A to D are for use with SKC adjustable low flow holders only.
| Description | Cat. No. | |
| A - for tubes 6-mm OD x 70-mm length |  |
224-29A |
| B - for tubes 8-mm OD x 110-mm length | |
|
| C - for tubes 10-mm OD x 150-mm length |  |
224-29C |
| D - for tubes 10-mm OD x 220-mm length |  |
|
| V - OVS Tube Holder includes fitting with durable
protective cover, 3 feet of tubing, and collar clip Do not use an adjustable low flow holder |
 |
|
| Low-volume PUF Tube Holder, includes fitting with durable
protective cover, 3 feet of tubing, and collar clip Do not use an adjustable low flow holder |
 |
|
When using the following pumps for low flow applications, use a CPC with an adjustable low flow holder (above).
| Pump Model | Cat. No. | |
| AirChek 2000, AirChek XR5000, and
AirChek 52 CPC Operating Instructions PDF |
 |
224-26-CPC |
| Pocket Pump and AirLite CPC Operating Instructions PDF |
|
|
Low Flow (5 to 500 ml/min) Adapter Kits
Includes Constant Pressure Controller (CPC), single Adjustable Low Flow Holder, and Type A tube cover
| Description | Cat. No. |
|
| AirLite Kit includes a constant pressure
controller (Cat. No. 224-26CPC-10), single adjustable low flow
holder (Cat. No. 224-26-01),
Type A protective
tube cover (Cat. No. 224-29A) |
 |
|
| AirChek 52, AirChek XR5000, and AirChek 2000 includes constant pressure controller (Cat. No. 224-26-CPC), single adjustable low flow holder (Cat. No. 224-26-01), and Type A protective tube cover (Cat. No. 224-29A) | |
|
| Low Flow Tube Holder with Plastic Cover For 222 Series and Pocket
Pumps SKC sample tubes – the most widely used in the industry – assure a positive seal between the sample pump and the sample tube. These all-in-one holders each include a holder with tubing and a lightweight protective plastic tube cover with collar clip. Choose the appropriate holder by matching the tube cover letter in the sorbent tube pages with the cover letter in the table below. Use these plastic holders with the Pocket Pump and 222 Series pumps only. |
 |
Plastic Cover |
Tube Specifications | Cat. No. |
A |
standard 6-mm OD x 70-mm length | 222-3-1 |
B |
7 or 8-mm OD x 110-mm length | 222-3L-1 |
C |
10-mm OD x 150-mm length | 222-3XL-1 |
D |
10-mm OD x 220-mm length and shorter tubes | |
Accessories
| Description | Cat. No. | |
| Breaker/Capper, stainless steel Size S, 6 and 7-mm OD tubes |  |
222-3-50 |
| Breaker/Capper, stainless steel Size L, 8 and 10-mm OD tubes |  |
222-3-51 |
| Tube Scorer/Breaker, for 6-mm OD tubes; scores and breaks end tips off glass tubes leaving a clean, smooth opening |  |
|
| Quality file, for Tips | ||
| Charcoal Pick | 222-3-20 | |
Tubing/Adapter Kit for Calibration of OVS Tubes
This new kit contains two sections of tubing and a tubing adapter to facilitate calibration of a sample pump when using an OVS Sorbent Tube.
OVS Tubing/Adapter Kit includes 2 sections of tubing and tubing adapter
OVS Tubing/Adapter Kit
Cat. No.........................................224-31
Tubing Available in Tygon, Latex Rubber, PTFE, and Polyurethane
| About SKC | Terms of Use | Privacy Policy | Contact Us | Site Map | Ordering Information |
SKC Inc.'s Quality Policy is in Compliance with IS0 9001-2000
© Copyright 1995-2012 SKC Inc